Hollow MgO cleanroom panels
Hollow MgO cleanroom panels have a magnesium oxide board core with hollow channels, faced with colour-coated or stainless steel. They are non-combustible and lighter than solid boards, and are widely used for cleanroom walls and ceilings.
Ask for a quotation Installation support
- Cleanroom walls and ceilings
- Hospital and pharmaceutical rooms needing a non-combustible core
- Projects where a lighter panel eases installation
Compare panel cores
| Core | Fire behaviour | Insulation | Weight | Cost |
|---|---|---|---|---|
| EPS (polystyrene) | Combustible — not for fire zones | Good | Light | Lowest |
| PU / PIR | Limited (PIR better) | Best | Light | Medium |
| Rock wool | Non-combustible core | Good | Heavier | Medium |
| PU edge-sealed rock wool | Non-combustible core | Very good | Medium | Medium |
| Silica rock | Non-combustible core | Good | Medium | Medium |
| Hollow MgO | Non-combustible core | Moderate | Medium | Medium |
| Paper / aluminium honeycomb | Non-combustible core | Moderate | Light | Medium |
What to specify for a quotation
- Wall or ceiling use, room heights and areas (or the drawing)
- Panel thickness and width series
- Face sheet: colour-coated steel or stainless steel, thickness and colour
- Joint type: tongue-and-groove, centre aluminium or male–female
- Fire, hygiene or test documents required by your project
- Destination port and delivery date
Questions
Is MgO panel suitable for wet areas?
Keep MgO cores protected from standing water; for wash-down areas we recommend sealed joints or a different core.
Can services run inside the panel?
The hollow channels can carry small cables where the project allows; confirm on the drawing.